News

In today’s highly competitive packaging and materials market, standard plastic sheets are no longer enough. Industries such as pharmaceutical packaging, food packaging, electronics, cosmetics, and ...

US threatens to further impose 50% tariffs on China, Ministry of Commerce responds

Yangzhou Jinfeng New Material Co., Ltd. to participate in the SHANGHAI APPPEXPO, the exhibitionvenue: National Convention and Exhibition Center, Booth No.: 6.2H-A2047 March 4th to 7th, 2025, SHANGH...

Yangzhou Jinfeng New Material Co., Ltd. is about to introduce a batch of high-end production equipment to meet the market demand for its products, while also achieving its strategic goal of expandi...

The history of PVC material There must be many fairies who are as curious as I am about how this PVC came into the public eye. And how did it become popular? In the 1920s and 1930s, plastic was a n...

Compared to other common plastic films, PET film has high tensile strength, excellent dimensional stability, low moisture absorption and good retention of physical properties over a higher temperat...

The hard sheet can also be called the film, it is a common material used for blister, if the thickness of the hard sheet is more than 2 mm then it is also called plate, there are common plates are ...

When laying PVC waterproofing membrane, attention should be paid to the temperature of the construction environment, and the temperature of the membrane should be above -5℃.

PVC waterproof membrane has high tensile strength, good elongation and small thermal dimensional change rate.

Before paving the concrete floor, it must be leveled 15-20 days in advance with mortar C10, and the leveling height is 5mm lower than the design height of the ground.

Roll up half of the roll and start gluing on the ground. Note that the coating area each time does not exceed half of the area of a single coil.

Select the PVC Roll floor produced by regular manufacturers to ensure that fire prevention and environmental protection meet the requirements of national standards.