1. PET sheet can be modified for fluidity:
(1) The blending of UHMWPE and LCP greatly improves the fluidity and can be processed by a single screw extruder; the more LCP added, the better the fluidity of the mixture.
UHMWPE is blended with PE, and the amount of PE added is below 30% to ensure that the blend has good processing performance and will not reduce too much excellent performance;
Add 10% or less polyethylene wax, stearate and other additives to UHMWPE; when adding 3~5% layered nanosilicate to UHMWPE, the melt flow index can reach 0.2~0.4g/10min; adding 1 % fumed silica UHMWPE can be used as a nucleating agent for polyethylene to improve its fluidity.
2. PET sheet can be modified for wear resistance:
After coupling treatment, adding molybdenum disulfide, graphite, ultra-fine carbon black, ultra-fine glass beads, carbon fiber and polytetrafluoroethylene can reduce the friction coefficient and improve the wear resistance. Add rubber, polyurethane, etc. will increase the coefficient of friction.
3. PET sheet can realize the modification of heat resistance:
After plasma cross-linking treatment, the service temperature of UHMWPE can be increased to 200°C. After coupling treatment, inorganic fillers (such as glass beads, wollastonite, talc, mica, calcium carbonate, etc.) are filled with UHMWPE. ) can significantly increase the HDT thermal distortion temperature.
4. PET sheet can realize the modification of thermal conductivity:
Adding copper powder, aluminum powder and lead powder can improve the thermal conductivity of UHMWPE.
5. PET sheet can realize mechanical modification:
Filling glass fiber, carbon fiber, ultrafine glass beads, talc, mica, calcium carbonate, kaolin, acicular wollastonite, alumina and silica can increase the strength, hardness and rigidity of UHMWPE.




