Production points of PET sheet

Apr 17, 2022 Leave a message

1. The important conditions for the production of PET sheets are the control of drying time and hot air dew point. The drying effect directly determines the physical and mechanical properties and output of the sheet. During the drying process, attention should be paid to the control of drying temperature and time, neither too high nor too low. If the dew point cannot be lowered, check the molecular sieve. Aged molecular sieves cannot absorb moisture in the air, so they cannot achieve the purpose of drying slices. At this time, the molecular sieve needs to be replaced.

2. If the melt temperature exceeds 280C, the PET sheet will be discolored or decomposed, so the melt temperature should be controlled below 280C.

3. The gap between the die lips determines the flatness and thickness uniformity of the plate, and the temperature of the three-roller plays a key role in the flatness and smoothness of the plate. The melt of the PET sheet needs to quickly avoid the temperature zone with a fast crystallization rate, and instantly drop from the melting temperature to below the crystallization temperature, so the distance between the die and the calender roll is particularly important.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry